| Standard | Ang mga sumusunod na mga kategorya ay dapat isama sa mga kategorya ng mga produkto: |
| Baitang ng Steel | Malambot na Magnetikong Alloy: 1J22, 1J50, 1J79, 1J85Elastic Alloy: 3J1, 3J53Panghabaan na Alloy: 4J29, 4J36, 4J42, 4J32, 4J33, 4J40, 4J50, 4J34Resistance Electrothermal Alloy: Ni80Cr20, Ni70Cr30, Ni6oCr15, Ni35Cr20, Ni30Cr20 |
| Teknik | Hot rolled at cold rolled |
| Bilog na pipe/tube | |
| Kapal ng pader | 1mm-150mm(SCH10-XXS) o kung kinakailangan |
| Labas na Bantog | 6mm-2500mm(3/8"-100°) o kung kinakailangan |
| Kwadrado na pipe/tube | |
| Kapal ng pader | 1mm-150mm(SCH10-XXS) |
| Labas na Bantog | 4mm*4mm-800mm*800mm |
| Habà | 4000mm, 5800mm, 6000mm, 12000mm, o kung kinakailangan. |
| Pisiweng rectangular | |
| Kapal ng pader | 1mm-150mm(SCH1O-XXS) |
| Labas na Bantog | 4mm*4mm-800mm*800mm |
| Klase ng Alloy | C | P | s | Mn | si | Cu | CR | Mo | Ni | co |
| 1J50 | 0.03 | 0.02 | 0.02 | 0.03/0.6 | 0.15/0.30 | 0.2 | / | / | 49.0/50.5 | / |
| 4J29 | O.03 | 0.02 | 0.02 | 0.5 | 0.3 | 0.2 | 0.2 | 0.2 | 28.5/29.5 | 16.8/17.8 |
| 4J33 | 0.05 | 0.02 | 0.02 | 0.5 | 0.3 | / | / | / | 321/33.6 | 14.0/15.2 |
| 4J42 | 0.05 | 0.02 | 0.02 | 0.8 | 0.3 | / | / | 1 | 415/425 | 1 |
| 4J50 | 0.05 | 0.02 | 0.02 | 0.8 | 0.3 | / | / | / | 49.5/50.5 | / |
| 4J36 | 0.05 | 0.02 | 0.02 | 0.20/0.6 | 0.3 | / | / | / | 35.0/37 | / |
| 4J28 | 0.12 | 0.02 | 0.02 | 1 | 0.7 | 1 | 27.0/29 | / | 0.5 | / |
Copyright © Jiangsu Hengdali Steel Industry Co.,Ltd. All Rights Reserved
EN
